7-DOT PRINT HEAD MODEL KT7

• 1 line of print
• Nominal character heights available (referring to a 7×5 matrix): 12 mm, 16 mm and 20 mm.
• Character matrices available: 5×5 or7x5 dots (a combination of different matrices is also possible)

16-DOT PRINT HEAD MODEL KT16

• 1 or 2 lines of print
• Nominal character heights available (referring to a 16×10 matrix): 32 mm, 40 mm, 60 mm and 75 mm.
• Character matrices available: 5×5 dots, 7×5 dots, 9×7 dots and 16×10 dots (a combination of different matrices is also possible).

• DOD (drop on demand) inkjet technology using valves
• controlled by highly efficient solenoids.
• Print speed: 50 metres a minute.
• You can progressively incline the print head to reduced character height up to approximately 50% of the nominal value, a feature exclusive to the control panel model STP 700.
• Distance between head and product to be printed: up to 30 mm.
• It can be installed in any position.
• 1,350 litre ink tank made of stainless steel, complete with filter.
• Air pressure regulator 0-1 bar with manometer.
• Ink available with the following bases: water, ethanol, mek (methyl ethyl ketone).
• Compressed air supply for ink tank: minimum pressure
• 1 bar and maximum 8 bar.